Tag Archives: cable conveyor chain

China CAD Drawing Custom Cable Double Conveyor Chain with Heat Treatment attachment roller chain

Product Description

Description

General Products Software /Support Location:

Steel components for automobile, agriculture device, development device, transportation gear, Valve and Pump program. E.g. Motor bracket, truck chassis bracket, equipment box , gear housing , gear go over, shaft, spline shaft , pulley, flange, link pipe, pipe, hydraulic valve, valve housing ,Fitting , flange, wheel, flywheel, oil pump housing, starter housing, coolant pump housing, transmission shaft , transmission gear, sprocket, chains and so on.

scraper conveyor chain

The scraper conveyor chain can be used to transport bulk materials in horizontal, inclined and vertical instructions. It is usually used for the transportation of uncooked grain, semi-completed merchandise and concluded products in CZPT and oil, feed processing vegetation. The scraper conveyor chain is suitable for the transportation of oil in the production method of grease processing crops. Transportation of raw CZPT from CZPT warehouse. 

It has the positive aspects of easy structure, very good sealing, straightforward feeding and unloading gadget, multi-point feeding and unloading, adaptable format, and the capacity to total substance transportation in a number of directions at the same time. The scraper conveyor chain of ZheJiang CZPT Chain Manufacturing facility adopts medium carbon quenched and tempered metal and chilly heading die steel. The metal is moderately priced and easy to procedure. Following proper warmth treatment, a certain degree of toughness, plasticity and use resistance can be obtained. Normalizing can market the spheroidization of the construction and is suited for floor hardening remedies these kinds of as high-frequency quenching and flame quenching. Application: Right after quenching and tempering, it can be utilized to manufacture medium load and medium speed perform. The functioning principle of the scraper conveyor is to use the open chute as a bearing component for coal, gangue or materials, and repair the scraper on the chain (to sort a scraper chain) as a traction member. When the driving element of the equipment head starts, the sprocket on the driving head shaft rotates, so that the scraper chain circulates and moves the animal content together the chute until it reaches the machine head to unload. The scraper chain bypasses the sprocket and runs in a stepless shut loop to total the transportation of components. Other scraper conveyor chain uses and routine maintenance safety measures have to be communicated with the provider. The previously mentioned info is for reference only.

China chain company iron chain hardened steel chain scraper conveyor

Solution Description

Customized Provider Chain Conveyor Belt Stainless Metal

Production Process 

Forging, press, in addition machining ,heat therapy , assembly

Blanks Tolerance:

   

Inner Packing →Strong & waterproof plastic massive is packed inside, to preserve the merchandise in risk-free problem.

Or as consumer requests.

Outer Packing →Multilayer picket box with sturdy bandages, utilised for common export package.
Or tailored as for every customer’s needs.

FAQ:

one. Are you a manufacturer or a trading organization?
We are a professional manufacturer with in excess of fifteen years’ export encounter for developing and making automobile machinery parts.
 
2. How can I get some samples? 
If you want, we are glad to offer you you samples for free, but the new customers are anticipated to pay the courier value, and the cost will be deducted from the payment for formal order.
 
three. Can you make casting in accordance to our drawing?
Yes, we can make casting in accordance to your drawing, 2nd drawing, or 3D cad design. If the 3D cad model can be supplied, the development of the tooling can be a lot more efficient. But with out 3D, dependent on 2nd drawing we can still make the samples properly accepted.
 
4. Can you make casting based mostly on our samples?
Indeed, we can make measurement based mostly on your samples to make drawings for tooling creating.
 
five. What is your good quality control device in house?
We have spectrometer in property to check the chemical property, tensile examination device to management the mechanical residence and UT Sonic as NDT checking strategy to management the casting detect underneath the surface area of casting.
 

 

US $1-6
/ kg
|
1 kg

(Min. Order)

###

Material: Alloy
Structure: Roller Chain
Surface Treatment: Heat Treatment
Chain Size: Customize
Feature: Heat Resistant, Customize
Item Name: Hand Hot Forging Press Chain Scraper Conveyor

###

Samples:
US$ 1.73/kg
1 kg(Min.Order)

|
Request Sample

###

Customization:

###

Customized Service Chain Conveyor Belt Stainless Steel
Production Process 
Forging, press, plus machining ,heat treatment , assembly
Blanks Tolerance:
+/-0.3~+/-2 mm
 
Production Applicable Material:
Stainless steel: 303, 304, 316L, etc
Steel: 4140, Q235, Q345B, 20#, 45#, 20CrMnTi,2Cr13, 40Cr etc
Aluminum: AL 6061-T6, 6063, 7075-T, etc
Forging Blank Size /Dimensions:
142 mm- 300mm or according to customer requirement
Blanks Weight:
Range from 0.1kg-1000kg
 Applicable Machining Process:
CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming etc.
 Machining Tolerance:
From 0.005mm-0.01mm-0.1mm
Machined Surface Quality:
Ra 1.6-Ra3.2 according to customer requirement
Applicable Heat Treatment:
Normalization , quenching and tempering, Case Hardening, Nitriding, Carbon Nitriding, Induction Quenching
Applicable Finish Surface Treatment:
Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Painting,
 MOQ of mass production:
For chain conveyor belt stainless steel: 50meters
Lead Time:
30-40 days from the receipt date of chain conveyor belt stainless steel
US $1-6
/ kg
|
1 kg

(Min. Order)

###

Material: Alloy
Structure: Roller Chain
Surface Treatment: Heat Treatment
Chain Size: Customize
Feature: Heat Resistant, Customize
Item Name: Hand Hot Forging Press Chain Scraper Conveyor

###

Samples:
US$ 1.73/kg
1 kg(Min.Order)

|
Request Sample

###

Customization:

###

Customized Service Chain Conveyor Belt Stainless Steel
Production Process 
Forging, press, plus machining ,heat treatment , assembly
Blanks Tolerance:
+/-0.3~+/-2 mm
 
Production Applicable Material:
Stainless steel: 303, 304, 316L, etc
Steel: 4140, Q235, Q345B, 20#, 45#, 20CrMnTi,2Cr13, 40Cr etc
Aluminum: AL 6061-T6, 6063, 7075-T, etc
Forging Blank Size /Dimensions:
142 mm- 300mm or according to customer requirement
Blanks Weight:
Range from 0.1kg-1000kg
 Applicable Machining Process:
CNC Machining/ Lathing/ Milling/ Turning/ Boring/ Drilling/ Tapping/ Broaching/Reaming etc.
 Machining Tolerance:
From 0.005mm-0.01mm-0.1mm
Machined Surface Quality:
Ra 1.6-Ra3.2 according to customer requirement
Applicable Heat Treatment:
Normalization , quenching and tempering, Case Hardening, Nitriding, Carbon Nitriding, Induction Quenching
Applicable Finish Surface Treatment:
Shot/sand blast, polishing, Surface passivation, Primer Painting , Powder coating, ED- Coating, Chromate Plating, zinc-plate, Dacromat coating, Finish Painting,
 MOQ of mass production:
For chain conveyor belt stainless steel: 50meters
Lead Time:
30-40 days from the receipt date of chain conveyor belt stainless steel

Different types of drive chains

There are many different types of drive chains. You should be able to differentiate between roller chains, forged rivetless chains, double chains, flat-top chains, and helical chains by the terms used. This article will provide information on the different types of chains. Then, you can choose the right one according to your needs. If you haven’t purchased a chain yet, read this article to get started. It will also provide information on the pros and cons of each type.
chain

roller chain

There are several differences between drive chains and roller chains, but in essence, the two are functionally similar. The choice of which type to use depends largely on the type of environment it will be exposed to. While roller chains are suitable for clean indoor environments, they are not very forgiving when it comes to rubbing against the rails. Following are the main differences between a drive chain and a roller chain. Using the correct drive chain is essential for a smooth and efficient running machine.
Roller chain drive chains come in many different weights and tensile strengths. For light-duty applications, use a smaller pitch chain. For heavy-duty applications, use larger pitch chains. The design simplicity of these chains makes them ideal for a variety of applications. While they are great for a variety of applications, the durability of these chains makes them ideal for a variety of applications. Some of the main uses of roller chain drive chains are listed below.
When replacing the drive chain, be sure to follow the safety guidelines. The most important thing to remember is not to place the chain on a dirty floor as it may cause stretch or damage. After removing the chain from the sprocket, apply the measured load specified by ANSI to it. If the load exceeds this value, the chain may bend. A suitable load for measuring a drive chain should be at least six links.
While roller chains are usually made of carbon steel, some are made of stainless steel and are used in food processing machinery. In these environments, the chain may be made of stainless steel for lubrication. Brass and nylon are also sometimes used to meet these requirements. Regardless of the application, however, choosing the right drive chain is critical to the success of a roller chain machine. It is important to maintain the proper balance between the roller chain and the machine.
To properly use a roller chain, first determine the size of the sprocket used for the drive. The size of the chain should be smaller than the smallest sprocket to prevent tooth interference and provide adequate winding on the smaller sprocket. A good practice is to choose a drive chain with a center distance of 30 to 50 times the chain pitch. The longest possible center-to-center distance is approximately 80 times the chain pitch but is not recommended for high-speed applications.

Drop forged rivetless chain

Drop-forged rivetless drive chains are made of drop-forged steel components. Their proportions are suitable for strength and lightweight. Forged rivetless chains are generally divided into three types. Each of these types has its own set of important specifications. Key topics include minimum ultimate tensile strength, chain length tolerances, and link dimensions. Read on to learn more about each type and its uses.
One of the main features of forged rivetless chains is that, despite their relatively low price, they are designed to be very durable. The quality of a forged chain depends on the structure and design of the chain. The manufacturer of this type of drive chain is CZPT, which has a large stock of these chains. The chain is proof tested after assembly and comes with a two-year parts replacement warranty.
Forged rivetless chains are available in a variety of pitch sizes and strength grades. They are made of cast manganese or alloy steel and have an average strength of 24,000 to 300,000 pounds. These chains are suitable for automotive, conveyor, and material handling as well as meat packaging, sugar processing, and steel mill applications. They are also widely used in conveying systems. To ensure quality and performance, manufacturers offer a variety of forged chains.
CZPT offers forged CZPT drive chains for fatigue-free operation. The chain includes a solid one-piece forged drive pawl for optimum durability. Chains are available in Figure 8 and in D-shape styles. For more information, please contact CZPT directly. Custom Drop-Forged rivetless drive chains can be ordered. Manufacturers also offer custom chains for specific application needs.

double chain

Duplex drive chains have two sets of rollers instead of one, producing twice the power. Double chain roller chains have pins and roller bearings, while triple chain chains have an extra row of plates to accommodate the three sprockets. They are usually interchangeable with each other. They are available for US, UK, and ISO standards. They are made of carbon steel, stainless steel, and nickel or nickel-plated.
chain

flat top chain

Flat-top drive chains are ideal for curved or straight tracks and come in many different types and thicknesses. These chains are highly resistant to wear and are usually made of steel, stainless steel, or plastic. CZPT manufactures special brands of flat-top chains with high wear resistance and excellent noise reduction. In addition to being versatile, flat-top chains can be used in a variety of industrial applications.
There are two main types of CZPT chains: solid top or raised rib. One piece is formed from a single unit link and the other has roller base links for added strength. The two-piece chain combines flat tabletop links and a roller bottom chain for added strength. These chains are available in widths up to 20 feet and are available in a variety of widths. These chains are available in stainless steel, cast iron, or plastic.
The hinge pin is another important part of the flat top chain system. Support chain plate to ensure smooth conveying. The hinges are available in single hinge pin and double hinge pin styles. Standard hinge pins are designed for straight, narrow-width chainplates; double hinge pins are designed for longer, heavier products. The hinge pins also come in many different materials, including aluminum and galvanized steel. This allows for customization based on machine design, operating conditions, and drive method.
Whether your flat-top chain conveyor system is large or small, a high-quality flat-top chain will get the job done. With their low maintenance and low maintenance design, these chains are easy to clean and maintain. They can accommodate workpiece pallets of various sizes, and their flexibility makes them ideal for many different applications. They can also be highly customized for various industries. So if you need an industry-specific conveyor, then a flat-top drive chain is the way to go.

China CAD Drawing Custom Cable Double Conveyor Chain with Heat Treatment     attachment roller chainChina CAD Drawing Custom Cable Double Conveyor Chain with Heat Treatment     attachment roller chain
editor by czh 2023-01-08